2022 NEW Portable Small Laser Welding Machine Made In China

Produktuaren Deskribapena

1. Machinery in the laser equipment industry, fill the gap in manual welding

2. Simple operation, beautiful welding beam, welding speed, no consumables

3. Welding stainless steel sheet, iron sheet, galvanized sheet, iron sheet and other metal

materials, which can completely replace traditional argon arc welding, electric

welding and other processes

4. It can be widely used in cabinets, kitchens, stairs, elevators, frames, ovens, stainless steel, steel door and window railings, distribution boxes, stainless steel homes, complex irregular welding, etc.

Produktuaren parametroa

Marka	OPTIKA
produktuaren izena	Handheld laser welding machine
Laser potentzia	1000W 1500W 2000W
Laser iturria	IPG / RAYCUS / JPT / MAX
Welding head	Swing head/normal head
cooling system	Ura hoztea
Laser mota	Fiber laser source
Adjustable power	5%—100%
power supply	220V/50/60HZ;380/50/60HZ
Laser uhin-luzera	1064nm, 1064nm
Neurriak	1200x800x1480mm
warranty period	2 urte
weight	280 KG

Advantages of laser welding swing head

1.The process that the conventional head cannot complete, the jitter head only needs to use about 70% of the power, so the cost of the laser can be saved;

2.Through the galvanometer motor weaving back and forth, so that there are a lot of impurities in the bubbles can reduce bubbles,frying, splashing, etc.

3.In the case of irregular gaps, the requirements for fixtures can be reduced.

The welding gap of the conventional oscillatory joint is usually 0.2 mm, and the light directly exceeding this width passes through. The width of the welding gap of the swing head can reach 0.5mm, but the traditional welding head can only be welded to 0.2mm. There is no welding head of the galvanometer motor inside, so there is no swing.

The welding effect is not good, and the welding process is limited.